High quality general purpose lathe suitable for jobbing and repair shops - maximum diameter over the bed 500mm and 1000mm between centers. The machine is equipped with an apron with the built-in engine of the accelerated movement and the feed box giving possibility of cutting a carving of 11 and 19 threads on inch without replacement of replaceable gears in a transmission.
Machines are intended for performance of various turning works and for cutting of carvings: metric, modular, inch, etc.
High quality general purpose lathe suitable for jobbing and repair shops - maximum diameter over the bed 500mm and 1000mm between centers. The machine is equipped with an apron with the built-in engine of the accelerated movement and the feed box giving possibility of cutting a carving of 11 and 19 threads on inch without replacement of replaceable gears in a transmission.
Checkout
Machines are intended for performance of various turning works and for cutting of carvings: metric, modular, inch, etc.
Machines can be equipped with the following options:
- the boring-and-milling adaptation intended for performance of drilling, milling works and cutting of a carving under different corners on the details established on a carriage;
- increased max swing diameter over bed - 630mm and 420mm over carriage;
- changed profile of bedways;
- with a gap, (swing in gap 630mm, length of gap 235mm);
- limb's division value of cross movement 0,02mm;
- mechanized drive of the top part of a carriage;
- various of DRO and converters of linear movements;
- stepless regulation of frequency of rotation of a spindle;
- distance between centers 1000mm/1500mm/2000mm/3000mm.
Machines manufactured in accordance with the safety requirements of the EU Directives, are marked with "CE"
| Swing over the bed, mm | 500 |
| Swing over the cross slide, mm | 275 |
| Distance between centres, mm | 1000 |
| Spindle bore, mm | 55 |
| Taper of spindle bore | Morse 6 |
| Maximum tool size,mm | 25 |
| Range of spindle speeds, rpm | 16-2000 |
| Number of spindle speeds | 22 |
| Range of metric threads, mm | 0.5-112 |
| Range of imperial threads, tpi | 56 - 0,5 |
| Longitudinal feed range, mm/rev. | 0.05 - 2.8 |
| Cross feed range, mm/rev. | 0.025 – 1.4 |
| Taper of tailstock centre | Morse 5 |
| Tailstock spindle travel, mm | 150 |
| Main drive motor, kW | 7.5;11 |
| Motor of fast movements,kW | 0.37 |
| Coolant pump motor, kW | 0.18 |
| Dimensions, mm | 2800×1265×1360> |
| Weight, kg | 3100 |
Standard accessories:
- 3 jaw self centring chuck Ø250 (mounted on the machine tool);
- tool set;
- key to control cabinet;
- set of replacement gear;
- instruction manual (passport).