Praha, Česká republika

420 775 216 216

420 773 162 174

Horizontal knee-type milling machine FW350MR, FW450MR (analogues, manufactured in the USSR - 6Т82Г, 6Т83Г).

The machines allow to machine steel and cast iron work pieces in automatic cycles by horizontally fixed mill cutters and disk cutters, fixed at the tool holder.

For milling machines of this series mounting of vertical milling heads is provided, which allows to widen field of application.

Main advantages of these milling machines are: simple in control; easy in operation; design rigidity; increased wear-resistant of guideways liners max. table load up to 1500 kg, which allows machining of large-capacity work pieces; mounted ball screw assemblies allow achieving high movement precision, which in turn allows us to mount Digital Read-Out (DRO) systems.


The machines have good referrals in small / large-batch production.

If you are interested in these milling machines, you could refer to their technical parameters in the table below.

Machine's model FW350MR FW450MR
Working surface of the table, mm 315 x 1250 400 x 1600
Table loading, kg 1000 1500
Longitudinal table travel, mm 850 1120
Cross slide rest travel, mm 270 345
Vertical knee travel, mm 355 400
Main drive power, kW 5.5 11
Max. spindle torque, Nm 925 1850
Tool taper ISO-50 ISO-50
Diameter of front bearing, mm 110 110
Number of feeds 18 18
Speed range, rpm 28…1400 28…1400
Longitudinal and cross feeds, mm/min 16…800 16…800
Vertical feeds, mm/min 5…250 5…250
Feed drive power, kW 1.5 2.2
Rapid travel, longitudinal and cross, mm/min 3150 3150
Rapid travel, vertical, mm/min 1000 1000
Total power consumption, kW 8.0 14.5
Following options are available:
table size, mm 375 x 1600 450 x 1800
vertical knee travel, mm 500 550, 630
main drive power, kW 7.5 15
speed range, rpm 45…2240 45…2240
longitudinal and cross feeds, mm/min 25…1250 25…1250
vertical feeds, mm/min 8…400 8…400